The original file is kept in the office. This is the text saved from it.
1 page
100%
Process number ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
Process content
Vacuuming
of
mixing vessel
Addition
of
raw materials
Mixing
of
raw materials
Addition
of
raw materials
Mixing
of
raw materials
Addition
of
raw materials
Mixing
of
raw materials
Sampling
of
products
Filling
of
products
Temperature [ ℃] Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Mixing speed [rpm] 0 40 40 40 40 40 40 0 0
Pressure [MPaG] ATM～-0.09 ATM～-0.09 ATM ATM ATM ATM ATM ATM ATM～0.03
Raw material number - A,B, (D:water) - C, (D:water) - D:water - - -
Operating time [min] 15 90 30 15 10 15 10 30 100
Remarks It takes 15 minutes
to complete
vacuuming.
Add raw materials
from 1F using a
vacuum..
Wash the raw
material feed pipe
with a portion of
raw material D:
water.
The inside of the
vessel is returned
to atmospheric
pressure by
sucking in air
through the nozzle.
After pouring into a
dedicated
container, add a
portion of raw
material D: water
to make a dilute
solution and add
through the
sampling nozzle.
Add the remaining
raw material D:
water using a
counter.
midterm inspection Pressurize the
vessel with
compressor air.
NEOCRYSTAL BC-4500 No. Raw Material Main ingredient Amount [kg]
A ●●●●● ●●●●● 2748.6
B ●●●●● ●●●●● 2248.9
C NEOSINTOL BC-●●● ●●●●● 3.33
D Soft Water water 50.0
NEOCRYSTAL BC-4500
Process number ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
Process content
Vacuuming
of
mixing vessel
Addition
of
raw materials
Mixing
of
raw materials
Addition
of
raw materials
Mixing
of
raw materials
Addition
of
raw materials
Mixing
of
raw materials
Sampling
of
products
Filling
of
products
Temperature [℃] Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Mixing speed [rpm] 0 40 40 40 40 40 40 0 0
Pressure [MPaG] ATM～-0.09 ATM～-0.09 ATM ATM ATM ATM ATM ATM ATM～0.03
Raw material number - A,B, (D:water) - C, (D:water) - D:water - - -
Operating time [min] 15 90 30 15 10 30 10 30 100
Remarks It takes 15 minutes
to complete
vacuuming.
Add raw materials
from 1F using a
vacuum..
Wash the raw
material feed pipe
with a portion of
raw material D:
water.
The inside of the
vessel is returned
to atmospheric
pressure by
sucking in air
through the nozzle.
After pouring into a
dedicated
container, add a
portion of raw
material D: water
to make a dilute
solution and add
through the
sampling nozzle.
Add the remaining
raw material D:
water using a
counter.
midterm inspection Pressurize the
vessel with
compressor air.
NEOCRYSTAL BD-2000 No. Raw Material Main ingredient Amount [kg]
A ●●●●● ●●●●● 1999.0
B ●●●●● ●●●●● 1499.3
C NEOSINTOL BC-●●● ●●●●● 3.33
D Soft Water water 1548.4
NEOCRYSTAL BD-2000
Process number ① ② ③ ④ ⑤ ⑥
Process content
Pour off with a
small amount
of water
Collect high-
concentration
liquid waste
Fill the mixing
vessel with
water
Agitate to
remove dirt
Drain
contaminated
water
Pour off with a
small amount
of water
Temperature [ ℃] Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Room
temperature
Mixing speed [rpm] 0 0 30 30 30 30
Pressure [MPaG] ATM ATM ATM ATM ATM ATM
Raw material number - - - - - -
Operating time [min] 10 10 40 30 30 30
Remarks Approximately 20
kg of water is used.
Water is supplied
directly to the
manhole with a
hose.
Approximately 25
kg of highly
concentrated liquid
waste is collected
and stored in a
special container.
The stored highly
concentrated liquid
waste is
periodically picked
up by the
processor.
Approximately
5,000 kg of water is
used.
Water is supplied
using a counter or
directly to the
manhole with a
hose.
Approximately
5,000 kg of
contaminated
water is
discharged.
The wastewater is
collected in an
industrial
wastewater pit.
Approximately 200
kg of water is used.
The wastewater is
collected in an
industrial
wastewater pit.
Washing process