POLYSOFTER AQ-09 (SDS)

POLYSOFTER AQ-09 Date of issue: 10/02/2014 Revision date: 12/01/2019 1 / 4 SAFETY DATA SHEET 1. Identification of the substance/ preparation and of the company Trade name : POLYSOFTER AQ-09 Company : PT. INDONESIA NIKKA CHEMICALS Street : Karawang International Industrial City (KIIC) JI.Maligi Ⅱ Lot E-3, Karawang 41361, INDONESIA Tel. : (021) 8904209, 8904309, 8902469 Contact person : Development and Technology Department E-mail Address : info-inkali@niccachemical.com Recommended use : Hydrophilic Softener Reference no. : INK-2514 2. Hazards identification GHS classification Physical hazards : Flammable liquids, Not classified Health hazards : Skin corrosion/irritation Not classified : Serious eye damage/eye irritation, Category 2B Environmental hazards : Hazardous to the aquatic environment — Acute Hazard, Category 3 Hazards not mentioned above are not applicable or there is no data is available. Label element Hazard pictograms : Not applicable Signal word : Warning Hazard statements : Causes eye irritation (H320) Harmful to aquatic life (H402) Precautionary statements [Prevention] : Wash hands, forearms and face thoroughly after handling (P264) Avoid release to the environment. (P273). [Response] : If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing (P305+P351+P338) If eye irritation persists: Get medical advice/attention. (P337+P313) 3. Composition/information on ingredients Distinction of substance or mixture : Mixture Name Concentration CAS No Anionic polymer Confidential Confidential Cationic compound Confidential Confidential Ester compound Confidential Confidential Nonionic surfactant Confidential Confidential Water Confidential 7732-18-5 4. First aid measures First-aid measures after inhalation : Remove to fresh air and keep at rest in a position comfortable for breathing. First-aid measures after skin contact : Wash with plenty of soap and water. First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. POLYSOFTER AQ-09 Date of issue: 10/02/2014 Revision date: 12/01/2019 2 / 4 If eye irritation persists: Get medical advice/attention. First-aid measures after ingestion : Call a POISON CENTER or doctor/physician if you feel unwell. Personal Protection in First Aid and Measures : Wear suitable protective clothing, gloves and eye or face protection. Notes to physician : No information available. 5. Fire fighting measures Extinguishing agents - fire fighting instructions : dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2), water spray, sand, earth Unsuitable extinguishing media : No information available. Fire hazard : No information available. Specific fire fighting : Use extinguishing agent suitable for surrounding fire. Eliminate all ignition sources if safe to do so. Fight fire with normal precautions from a reasonable distance. Approach from upwind. Use water spray or fog for cooling exposed containers. Isolate from fire, if possible, without unnecessary risk. Personal protection (Emergency response) : Wear suitable protective clothing, gloves and eye or face protection. Wear suitable respiratory equipment. Do not breathe fumes from fires or vapours from decomposition. 6. Accidental release measures Personal Precautions, Protective Equipment and Emergency Procedures : Do not attempt to take action without suitable protective equipment. Do not breathe gas, fumes, vapour or spray. Ensure that there is a suitable ventilation system. Approach from upwind. If spilled, may cause the floor to be slippery. Environmental precautions : Do not discharge into drains or rivers. Harmful to aquatic organisms. Methods and Equipment for Containment and Cleaning up : Take up large spills with pump or vacuum. Large quantities: Contain large spillage with sand or earth. Scoop absorbed substance into closing containers. Soak up with inert absorbent material (for example sand, sawdust, a universal binder, silica gel). Prevention Measures for Secondary Accidents : Spilled material may present a slipping hazard. 7. Handling and storage Handling Technical measures : Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Precautions for safe handling : Avoid contact with skin and eyes. Wear suitable protective clothing, gloves and eye or face protection. Always wash hands after handling the product. Work outside or in a well-ventilated room. Do not breathe gas, fumes, vapour or spray. Storage precautionary statements Storage conditions : Store in a closed container. No information available. Material used in packaging/containers : No additional information available. POLYSOFTER AQ-09 Date of issue: 10/02/2014 Revision date: 12/01/2019 3 / 4 8. Exposure controls / Personal protection equipment Exposure limits (ACGIH) : Not applicable Appropriate engineering controls : Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Use appropriate ventilation. Respiratory protection : Not required for normal conditions of use. Hand protection : Protective gloves Eye protection : Chemical goggles or safety glasses Skin and body protection : Long sleeved protective clothing 9. Physical and chemical properties Appearance : white liquid Odour : slight pH : Approx. 3 (undiluted) Melting point : No data available Freezing point : No data available Viscosity : No data available Boiling point : Approx. 100 °C Flash point : None Decomposition temperature : No data available Vapour pressure : No data available Relative vapour density at 20 °C : No data available Specific gravity density : Approx. 1.0 g/ml (20 °C) Solubility : Water: Dissolves arbitrarily Log Pow : No data available Explosive limits (g/m³) : No data available 10. Stability and reactivity Chemical stability : Stable under normal conditions. Possibility of hazardous reactions : No information available. Conditions to avoid : No information available. Incompatible materials : No information available. Hazardous decomposition products : No information available. 11. Toxicological information Acute toxicity (oral) : No information available Acute toxicity (dermal) : No information available Skin corrosion/irritation : Not classified. Estimated on the basis of the constituents Serious eye damage/irritation : Causes eye irritation. Estimated on the basis of the constituents Respiratory or skin sensitisation : No information available Germ cell mutagenicity : No information available Carcinogenicity : No information available Reproductive toxicity : No information available Specific target organ toxicity (single exposure) : No information available Specific target organ toxicity (repeated exposure) : No information available Aspiration hazard : No information available POLYSOFTER AQ-09 Date of issue: 10/02/2014 Revision date: 12/01/2019 4 / 4 12. Ecological information Ecotoxicity Fish Toxicity(LC50) : 120 mg/l (Red killifish, 96hrs. OECD TG203) Persistence and degradability Biochemical oxygen demand (BOD) : 43 mg/l (Coulometer method, 0.1% water solution) Chemical oxygen demand (COD) : 536 mg/l (JIS K-0102, 0.1% water solution) Persistence and degradability : No additional information available Biodegradation : 90 % (OECD 302B) Bioaccumulative potential : No additional information available Ecology - soil : No additional information available Ozone : None of the chemical components of this product are listed in the Annex of Montreal Protocol. 13. Disposal considerations Dispose of contents/ container in accordance with local authority requirements. Remove to an authorized waste treatment plant. Empty the packaging completely prior to disposal. 14. Transport information UN number : Not applicable UN proper shipping name : Not applicable Class : Not applicable Packing group : Not applicable Marine pollutant : Not applicable 15. Regulatory information We can not check up the regulatory information in regard to the substances in your country or region. Therefore we request this matter would be filled by your responsibility. Follow all regulations in your country. 16. Other information DISCLAIMER OF LIABILITY The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This SDS was prepared and is to be used only for this product. If the product is used as a component in another product, this SDS information may not be applicable. The classification is based on the National Institute of Technology and Evaluation (NITE).