SDS SETAVIN PMD_Raw material for BD-2000 BC-4500

M a t e r i a l S a f e t y D a t a S h e e t SETAVIN PMD - 1 - Date of issue: 5/19/2010 1. Product and Company Identification Product Name Setavin PMD Product CAS Number (if applicable) Mixture Product Type, Usage, or Industry Dispersant for the textile industry Company Information Zschimmer and Schwarz, Inc. 70 GA Hwy. 22 W Milledgeville, GA 31061 Emergency Contact Company: (478) 454-1942 CHEMTREC: (800) 424-9300 2. Hazardous Composition and Information This section contains hazardous components which comprise 1.0% or more of the formula; carcinogens are listed at 0.1% or greater. CAS Number Material or component Avg % weight 9084-06-4 Sodium salt of poly-naphthalene sulfonic acid 30 – 50 50-00-0 Formaldehyde < 500ppm 91-22-5 Quinoline < 500ppm 91-20-3 Naphthalene < 100ppm This is not intended to be a complete compositional disclosure. Information provided pursuant to the OSHA Hazard Communication Standard (29 CFR 1910.1200). 3. Hazards identification HMIS Rating: Health: 1 Fire: 0 Reactivity: 0 PPE: X Primary routes of exposure: Eyes: Causes eye irritation including excessive watering and redness. Skin: Prolonged contact may cause itching and redness. Inhalation: Not an expected route of exposure. Ingestion: May cause discomfort and/or gastrointestinal distress. M a t e r i a l S a f e t y D a t a S h e e t SETAVIN PMD - 2 - 4. First Aid Measures Eyes: Flush immediately with copious amounts 15 min. Get medical attention. Skin: Flush affected area with water for 15 minutes. If itching or redness persists seek medical attention. Contaminated clothing should be removed immediately and washed before reuse. Contaminated shoes should be discarded. Inhalation: Move the person to fresh air. If breathing becomes difficult, get medical attention. Ingestion: Rinse mouth with water and get immediate medical attention. 5. Firefighting Measures Flash point: N/A Flammability limits: Lel : N/D. Uel : N/D Suitable extinguishing media: alcohol-resistant foam; dry powder; CO2 Special protective equipment for firefighters: Self-contained breathing apparatus and protective clothing when fighting any chemical fire. Unusual fire & explosion Hazards: Fire conditions my produce CO x and SO x . 6. Accidental Release Measures Personal precautions: Avoid contact with eyes and skin. Keep unnecessary personnel away. Environmental precautions Limit leakage with earth or sand. Do not discharge into the drains/surface water/ground water. Dispose of absorbed material in accordance with local, state and federal regulations. Methods for cleaning up/taking up Take up with absorbent material. (e.g. earth or sand.) Dispose of absorbed material in accordance with local, state, and federal regulations 7. Handling and Storage Advice on safe handling Keep container closed. Avoid getting on skin or in eyes when handling product. Advice on protection against fire and explosion No special measures necessary. Requirements for storage rooms and vessels Store in cool dry places between 40°F (4°C) and 95°F (35°C). M a t e r i a l S a f e t y D a t a S h e e t SETAVIN PMD - 3 - 8. Exposure Controls and Personal Protective Equipment Component with OSHA exposure limits to be monitored CAS No. Description of substance Type Value 50-00-0 Formaldehyde OSHA PEL 0.75ppm TWA 91-20-3 Naphthalene NIOSH REL 10ppm TWA General protective measures / hygiene measures: Observe the usual precautions when handling chemicals. Hand protection : Use impervious gloves Eye protection : Safety glasses with side shields Respiratory protection : None needed under normal conditions. Skin protection : Protective clothing Ventilation : Recommended Local Exhaust : Recommended. Other Protective Equipment : Eye-wash station 9. Physical and Chemical Characteristics Form and Appearance: Dark brown liquid Odor: Characteristic Boiling point: ~ 221°F (105°C) Freezing point: ~ 28.4°F (-2°C) pH: ~ 9.0 Specific gravity/Bulk Density: ~ 1.20 Flash point: N/A Viscosity: N/D Solubility in water: Soluble Vapor pressure: N/D 10. Stability and Reactivity Chemical stability : Product is stable under ordinary conditions of use and storage. Conditions to avoid : Avoid exposure to extreme temperatures. Incompatibility : To strong oxidizers. Hazardous decomposition products : Fire conditions my produce CO x and SO x . Hazardous polymerization : Will not occur. M a t e r i a l S a f e t y D a t a S h e e t SETAVIN PMD - 4 - 11. Toxicological Information Acute Toxicity: Eyes: Irritant (slightly hazardous). Ingestion: LD50 (rat): > 2,000 mg/kg Slight hazard. Skin: Prolonged contact may cause irritation. Chronic Health Effects: None known. 12. Ecological Information Ecotoxicity : No known significant effects or critical hazards. Environmental fate: Nor readily biodegradable. 13. Disposal Considerations Dispose of absorbed material in accordance with local, state, and federal regulations. 14. Transport Regulations DOT Regulations: Proper Shipping Name: Not regulated. Hazard Class: Not regulated. UN Number: Not regulated. Packing Group: Not regulated. Label Required: Not regulated. M a t e r i a l S a f e t y D a t a S h e e t SETAVIN PMD - 5 - 15. Regulatory Information Contents of this MSDS comply with the OSHA standard 29 CFR 1910.1200. TSCA Status: All the components in this material are listed under TSCA inventory. EPA SARA Title 302: Formaldehyde – Below reporting threshold. EPA Section 304 CERCLA Hazardous substance: CAS # Description % Weight CERCLA RQ 50-00-0 Formaldehyde < 0.05 100 lbs 91-20-3 Naphthalene < 0.05 100 lbs 91-22-5 Quinoline < 0.01 5,000 lbs EPA Section 311/312 Hazard Categorization: Acute x Chronic Fire Pressure Reactive None EPA Section 313 Toxic chemicals: CAS # Description % Weight 50-00-0 Formaldehyde < 0.05 91-20-3 Naphthalene < 0.05 91-22-5 Quinoline < 0.01 16. Additional Information This information is based on our present state of knowledge. It should not be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Existing acts and regulations must be observed by the recipient of our products under their own responsibility.